Performance Data
Guide Specifications
Unit Drawings
Maintenance & Troubleshooting
Installation & Operation
Performance Data
Guide Specifications
Unit Drawings
Unit Drawings
SRV1_008-018_01_DD
SRV1_008-018_02_DD
SRV2_020-036_01_DD
SRV2_020-036_02_DD
SRV3_042-060_01_DD
SRV3_020-036_02_DD
SRV4_070-100_01_DD
SRV4_170-100_02_DD
Maintenance & Troubleshooting
Maintenance and Trouble Shooting
Maintenance for the BULLDOG system is simple and easily done. Essentially it consists of establishing regular inspection and filter changes. To remove the filter from the unit lift the filter up and pull it out from the bottom. Replace the old filter by sliding the top edge of a new filter up into the rack, then pushing in the bottom of the filter until it drops into place. In some cases, filters can also be slid horizontally for removal. For complete maintenance instructions, consult the Installation and Operations Manual for the SpaceKeeper Vertical Products.
Always remember to disable the unit using the disconnect before servicing to prevent injury or death due to electrical shock or contact with moving parts.
For assistance in diagnosing BULLDOG Heat Pumps the Trouble Shooting Guide below is downloadable or printable PDF file: BULLDOG Diagnosis Table
Installation & Operation