Overview
Models
Cut Sheet
Performance Data
Guide Specifications
Unit Drawings
Maintenance & Troubleshooting
Installation & Operation
Overview
Overview
Only 11″ high for shallow ceiling heights
Positive pressure condensate drainage (no traps required)
Models
Models
SlimKeeper Models SLK008-015 3/4 – 1 1/4 tons 11″H x 30″W x 24″L
Cut Sheet
Standard:
Performance Data
Guide Specifications
Unit Drawings
Unit Drawings
2017_SLK_DD
Maintenance & Troubleshooting
Maintenance and Trouble Shooting
Maintenance for the BULLDOG system is simple and easily done. Essentially it consists of establishing regular inspection and filter changes. To remove the filter from the unit lift the filter up and pull it out of the unit at the bottom. Replace the old filter by sliding the top edge of a new filter up into the rack, then pushing in the bottom of the filter until it drops into place. For complete maintenance instructions, consult the Installation and Operation Manual for the SlimKeeper Horizontal Products.
Always remember to disable the unit using the disconnect before servicing to prevent injury or death due to electrical shock or contact with moving parts.
For assistance in diagnosing BULLDOG Heat Pumps the Trouble Shooting Guide below is a downloadable or printable PDF file: BULLDOG Diagnosis Table
Installation & Operation